A.R.North America AR610 Blue Clean, Руководство пользователя, Страница: 4 / 8

Pos. Code Description Qty. Pos. Code Description Qty.
Kit 2767
17 2
22 1
27 3
34 1
35 1
37 1
40 1
49 3
51 1
60 1
63 5
69 5
72 1
O-Rings
Pos. Qty.
1 1340700 Black post. casing 1
2 1261560 Screw 2
3 1260760 Screw 4
4 1200430 Screw 8
5 1340811 Black plug 1
6 1260351 Tank plug 1
7 390210 O-Ring 1
8 1342010 Black ant. casing 1
9 1342001 Black pres. gauge cover 1
10 1343250 Cable 1
11 1340340 Bearing 1
12 1340320 Rear cover 1
13 1260760 Screw 4
14 1260300 Fan 1
15 1340350 Seal 1
16 1269100 Earth connection 1
17 1340780 Switch-box gasket 1
18 1340480 Switch box 1
1263520 Capacitor 40 μ F 1
1263510 Capacitor 32
μ
F 1
1263550 Capacitor 80
μ
F 1
1341221 Switch 8A 1
1263110 Switch 16A 1
1341140 Switch 8A gasket 1
1265080 Switch 16A gasket 1
22 1261560 Screw 4
23 1262370 Gland 1
24 1463860 Nut 1
25 1463850 Gland 1
26 1260810 Screw 1
27 1340280 Clamp 1
28 4380 Electric motor 1
29 1260780 Screw 4
30 1344060 Cover 1
31 1040710 O-Ring 1
32 1260050 Bushing 1
33 1344050 Pump body 1
34 1340050 Oil level 1
35 1340300 Crankshaft 1
36 880111 Key 1
37 1341070 Roller bearing 1
38 480890 Circlip 1
39 111120 Circlip 1
40 1341080 Seal 1
41 1340060 Con-rod 3
42 1340080 Pin 3
43 1340070 Guiding piston 3
44 1260460 Seal 3
45 600180 O-Ring 4
46 1341010 Spacer 3
47 1342740 Piston 3
48 1341020 Washer 3
49 850670 Screw 3
50 600180 O-Ring 1
51 1349236 Pump assembly 1
52 1260440 Gasket 3
53 770260 O-Ring 3
54 1342730 Piston guide 3
55 1342760 Gasket 3
56 1342720 Support ring 3
57 1342750 Plate 3
58 1349053 Complete valve 6
59 800560 O-Ring 6
60 390341 O-Ring 1
61 1343110 O-Ring 1
62 1342710 Nozzle 1
63 1460430 O-Ring 1
64 1460260 Piston 1
65 1540140 Spring 1
66 880270 O-Ring 1
67 1342690 Outlet fi tting 1
68 550450 Ring nut 1
69 1340250 Hose tail 1
70 1340260 Filter 1
71 2605 Suction fi tting 1
72 881470 Screw 4
73 680700 Screw 1
74 480480 O-Ring 3
75 1340190 Cover 1
76 780050 O-Ring 1
77 620301 Plug 1
78 1342670 Pump head 1
79 851100 Grub 1
80 1250270 Spring 1
81 1250280 Ball 1
82 3225 Pressure gauge 1
83 1342700 Regulation valve seat 1
84 1460430 O-Ring 1
85 1460150 Lower piston 1
86 1343810 Valve seat 3
87 740290 O-Ring 5
88 1260670 Detergent fi tting 1
89 1342680 Head cover 1
90 1381550 Washer 4
91 1343510 Screw 4
92 1080190 O-Ring 1
93 1460140 Upper piston 1
94 1269115 Hose & fi lter 1
95 1080401 Ring 1
96 1343450 Spring plate 1
97 1460190 Spring 1
98 1343000 Spring plate 1
99 1980640 Knob insert 1
100 1060120 Nut 1
101 392840 Grub screw 1
102 1322520 Knob 1
19
20
21
Repair Kits for Pump
Pos. Qty.
Water Seals Valves Pistons Oil Seals
Kit 2624 Kit 1880 Kit 2623 Kit 1876
52 3 58 6 45 3 31 1
53 3 59 6 47 3 40 1
55 3 48 3 44 3
56 3 52 1
57 3
Pos. Qty. Pos. Qty. Pos. Qty.
2.1.11 Do not tamper with or alter the calibration of the safety valve.
EXPLOSION HAZARD.
2.1.12 DO NOT alter the original diameter of the spray head nozzle.
OVER PRESSURIZATION MAY OCCURE.
2.1.13 DO NOT leave the cleaner unattended. ACCIDENT HAZARD.
2.1.14 DO NOT move the cleaner by pulling on the electrical cable.
SHORT CIRCUIT HAZARD.
2.2 Safety “MUSTS”
2.2.1 All electrical circuits MUST BE PROTECTED against the water
jet. SHORT CIRCUIT HAZARD.
2.2.2 The cleaner MUST ONLY BE CONNECTED to a ground fault
system. ELECTRIC SHOCK HAZARD.
• Use of a safety residual current circuit-breaker (R.C.C.B.) will provide
additional protection for the operator. (30 mA)
2.2.3 The high pressure may cause materials to bounce off surfaces
at speeds; therefore protective clothing and safety goggles
MUST BE WORN. INJURY HAZARD.
2.2.4 Before working on the cleaner, REMOVE the electrical plug.
ACCIDENTAL START UP HAZARD.
2.2.5 Before pressing the trigger, GRIP the gun fi rmly to counteract
the recoil. INJURY HAZARD.
2.2.6 COMPLY WITH the requirements of the local water supply
company. According to DIN 1988, power-jet cleaners may
only be connected to the mains drinking water supply with a
backfl ow preventer valve with drain facility is installed in the
supply hose. CONTAMINATION HAZARD.
2.2.7 A qualifi ed technician MUST carry out maintenance and/or
repair of the electrical components. ACCIDENT HAZARD.
2.2.8 DISCHARGE residual pressure before disconnecting the
cleaner hose. Turn the water supply off and squeeze the spray
gun trigger. INJURY HAZARD.
2.2.9 Before each use. CHECK that all the screws are fully tightened
and that there are no broken or worn parts. ACCIDENT
HAZARD.
2.2.10 Only USE detergents, which will not corrode the coating
materials of the high- pressure hose/electrical cable and unit
components. EXPLOSION AND ELECTRIC SHOCK HAZARD.
2.2.11 ENSURE that all people or animals keep a minimum distance of
16 yd. (15m) away. INJURY HAZARD.