A.R.C. Laser Nuvolas, Руководство пользователя

Страница: 42 / 56

User Manual NUVOLAS
April 2023
File: User Manual_NUVOLAS_rev3.docx 42
8.4 Cleaning of accessories
8.4.1 Laser safety goggles
The cleaning instructions provided with the laser safety glasses must be observed.
In general, you should never use chemicals for cleaning that could damage the coating
of the glasses. Always use soft cloths that do not leave scratches on the surface.
8.4.2 Applicators
In most cases the applicators are single use products and must not be reprocessed.
Please follow the instructions in the manual for fibers and probes.
8.4.3 Foot switch
The general cleaning instructions (see above) must be observed in any case.
When cleaning the foot switch, prevent the penetration of water or cleaning agents. Never
place the foot switch in water or cleaning agent, This could lead to a short circuit.
8.5 Error Detection
The NUVOLAS was designed and developed as a modular system. In addition, all
components were subjected to a rough shaking and termperature test. In the event of a
fault, yo can use these instrucions to isolate the problem and in some cases even rectify
it yourself. Otherwise, please contact the service department of A.R.C. Laser GmbH or
the local representative.
When an error occurs in the system, the error will be displayed along with a
symbol to identify the error.
Common errors might be:
•
The red laser-Stop needs to be pulled out.
•
Interlock: The door interlock connector should be fully inserted to the device or the
door contact switch should be closed.
•
The display is not connected correctly, the connecting cable is not connected or
has losen.