A.O. Smith S7, Руководство пользователя

Страница: 23 / 28

Technical Specifications
* Flow rate depends on variable factors such as feed water pressure, feed water characteristics and
condition of the membranes and filters.
** Recovery and TDS reduction percentages also depend on variable factors such as life and condition of
the membranes and filters, feed water pressure, feed water characteristics.
*** If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the
pressure is lower than 7 psi, a booster pump needs to be installed. Ensure you buy them from
A. O. Smith authorised distributor.
20
Model A. O. Smith Water Purifier
Product Dimensions (H x D x W) in mm 490 x 329 x 315
Net weight 9.5 kgs (approx.)
Gross weight 13.9 kgs (approx.)
Flow rate* Up to 15 litres per hour
Storage tank capacity 9 litres (approx.)
Purification technology RO (Reverse Osmosis) + Silver Charged
Membrane Technology
7 Stage Purifying Technology Pre- Sediment Pre Carbon filter
+ Side Stream RO m MIN-TECH +
Silver Activated Post Carbon and SCMT filter
Membrane type Thin film composite RO membrane
Material of construction for plastic parts Food safe, non-toxic, engineering grade
plastics
Pump type Diaphragm pump, 24VDC, 0.26 Amps,
Operating Pressure 125 psi (Max.)
Input voltage range 150 – 300 VAC, 50 Hz
Power rating (Max.) 48 Watts
Pressure Rating*** 7 psi to 30 psi
% Recovery** Up to 30%
TDS reduction** ≥95% (approx.)
Input water temperature 5°C to 45°C