background image

4

Thank You

 for purchasing this water heater.  Properly installed 

and maintained, it should give you years of trouble free service.
Abbreviations Found In This Instruction Manual:
•  ANSI - American National Standards Institute
•  AHRI - Air-Conditioning, Heating and Refrigeration Institute
•  NEC - National Electrical Code
•  NFPA - National Fire Protection Association
•  UL - Underwriters Laboratory

PREPARING FOR THE INSTALLATION

1. 

Read the “General Safety Information” section of this manual 

first and then the entire manual carefully. If you don’t follow 

the safety rules, the water heater may not operate safely. It 

could  cause  DEATH,  SERIOUS  BODILY  INJURY AND/OR 

PROPERTY DAMAGE.

  This manual contains instructions for the installation, operation, 

and maintenance of the electric water heater.  It also contains 

warnings throughout the manual that you must read and be 

aware of.  All warnings and all instructions are essential to the 

proper operation of the water heater and your safety.  

READ 

THE ENTIRE MANUAL BEFORE ATTEMPTING TO INSTALL 

OR OPERATE THE WATER HEATER.

  Be sure to turn off power when working on or near the 

electrical system of the heater. Never touch electrical 

components with wet hands or when standing in water. 

When  replacing  fuses  always  use  the  correct  size  for  the 

circuit, see tables on page 11.

   The  model  and  rating  plates  on  page  6  interprets  certain 

markings into useful information. Both of these references should 

be used to identify the heater, its components and optional 

equipment.

2.  The installation must conform with these instructions and the 

local code authority having jurisdiction and the requirements 

of  the  power  company.  In  the  absence  of  local  codes,  the 

installation must comply with the latest editions of the National 

Electrical Code, NFPA 70 or the Canadian Electrical Code CSA 

C22.1. The National Electrical Code may be ordered from: 

National  Fire  Protection Association,  1  Batterymarch  Park, 

Quincy, MA 02269. The Canadian Electrical Code is available 

from the Canadian Standards Association, 8501 East Pleasant 

Valley Road, Cleveland, OH 44131.

3.  If after reading this manual you have any questions or do not 

understand  any  portion  of  the  instructions,  call  the  toll  free 

number listed on the back cover of this manual for technical 

assistance. 

  A sample rating plate is shown on page 6 of this manual. In 

order to expedite your request, please have full model and serial 

number available for the technician.

4.  Carefully plan your intended placement of the water heater.  

Examine the location to ensure the water heater complies with 

the “Locating the New Water Heater” section in this manual.

  Installation  and  service  of  this  water  heater  requires  ability 

equivalent to that of a licensed tradesman or qualified agency 

(page 2) in the field involved. Plumbing and electrical work 

are required.

TABLE OF CONTENTS

INTRODUCTION

SAFE INSTALLATION, USE, AND SERVICE.......................................

2

GENERAL SAFETY INFORMATION ....................................................

3

Precautions ..................................................................................

3

Hydrogen Gas (Flammable) .........................................................

3

INTRODUCTION ..................................................................................

4

Preparing for the Installation

 ........................................................

4

DIMENSIONS AND CAPACITIES DATA .............................................. 5
APPROVALS ........................................................................................

6

MODEL AND RATING ..........................................................................

6

FEATURES AND COMPONENTS .......................................................

7

LOCATING THE NEW WATER HEATER ............................................. 8

Facts to Consider About the Location .......................................... 8
Clearances ................................................................................... 8

INSTALLATION ....................................................................................

9

Required Ability ............................................................................

9

General .........................................................................................

9

Contaminated Water .....................................................................

9

Circulating Pump ..........................................................................

9

Insulation Blankets .......................................................................

9

Temperature-Pressure Relief Valve ..............................................

9

Closed Water Systems ...............................................................

10

Thermal Expansion ....................................................................

10

ELECTRICAL ......................................................................................

11

General ........................................................................................

11

Branch Circuit ..............................................................................

11

Calculating Amperage/Overcurrent Protection ............................

11

WIRING DIAGRAMS ..........................................................................

12

OPERATION .......................................................................................

13

General .......................................................................................

13

Filling the Water Heater ..............................................................

13

Initial Start Up .............................................................................

13

Draining the Water Heater ..........................................................

13

TEMPERATURE REGULATION ........................................................

14

Temperature Adjustment ............................................................

14

MAINTENANCE ................................................................................. 15

General ....................................................................................... 15
Anode Rod Inspection ................................................................ 15

TROUBLESHOOTING CHECKLIST ..................................................

16

Checklist .....................................................................................

16

Leakage Checkpoints .................................................................

17

WARRANTY ....................................................................................... 18

Repair Parts List .........................................................................

19

NOTES ...............................................................................................

21

Содержание LTE 66D

























Отзывы: