A.O. Smith LOTUS-75M, Руководство пользователя

Страница: 12 / 48

ENG 10
• Stock up on top of each other more than 8 pieces.
• Before lifting the packages be sure that fixing tapes below the package
are intact.
• Lift the packages holding from bottom.
• Persons, who are vulnarable to heavy lifting shoud not carry the packages
to prevent any health issues.
Transportation
Please take into consideration the following points while transporting the device.
Pre-Installation Preparations
• Choose the location where the water purifier will be installed
• Confirm the availability of the various tools required
for installation
• Confirm that you have all the connectors required for installation
• Make sure to turn off the water supply and electricity before
commencing installation
Installation Methods
Our company recommends that your water purifier is installed by trained professionals as the installation process is somewhat complex and requires the
use of various tools. However, if you decide to install the purifier yourself, please refer to the following steps and diagrams:
Adjustable Spanner
Drill
6.2 mm Drilling Bit
Hole Saw
φ 14 mm
Phillips and Flathead Screwdrivers
Scissors
14 - 16 mm Wrench
19 - 21 mm Wrench
Needle Nose Pliers
1
1
1 (Waste water hole)
1 (High-speed steel or marble hole saw)
1 of each
1 pair
1
1
1
Functions of Accessories
• Storage Tank: Used to store water filtered by the water purifier.
• High Pressure Pump: Boosts pressure to create a stable environment
for the RO membrane.
• Flow Restrictor Device: Controls waste water flow.
• Low Pressure Switch: Prevents pump idling. When the inlet water
pressure is less than 0.03 MPa or when the inlet water stops,
the low-pressure switch automatically shuts off the power source
so the machine comes to a halt.
• High-Pressure Switch: Prevents pump from overdrive. When the storage
tank is full or has reached the set pressure level, power supply is
automatically cut off to stop the operation of the machine.
• Check Valve: Also known as a one-way valve, controls the direction
of water flow.
• Transformer: Converts 220V AC to 24V DC (the machine’s safe
operating voltage).
• Shut-Off (4 Way) Valve: It directs the flow of purified and drain water.
It is synchronized with the RO pump action. When the pure water
storage tank is full of water, the RO pump and shut-off valve will
automatically shut down. When shut-off valve shuts down, the purified
and drain water both will be shut down.