A.O. Smith LILY, Руководство пользователя

Страница: 11 / 56

ENG 9
Functions of the Main Components
The standard configuration of the water purifier that utilizes the current,
most advanced international RO technology is as follows:
• The first stage is a 5-micron PP (Sediment) Filter:
The pores on the aperture within the PP filter is 5 microns wide so it
can effectively filter rust, sand, other larger particles and solid impurities
suspended in the water.
• The second stage is a Carbon Block Filter:
The filter effectively absorbs chlorine, mould, disinfection by-products,
odors, discolorations and other materials suspended in the water.
• The third stage is the RO membrane:
The RO membrane with a pore size of 0.0001 micron (0.1 nm), it can
effectively remove bacteria, viruses, heavy metals, pesticide residue, and
other harmful substances. Produced water is fresh, pure and suitable
for direct use.
• The fourth-stage is a Post Active Carbon (PAC) Filter:
This filter regulates the taste of water, keeps the water fresh.
• The fifth-stage is a UV Disinfection:
This unit effectively restrains the water pipe and tank etc to breed the
bacteria after long time without use.
Note: the parameters above may change due to product improvements, but the product name plate shall remain the same. TDS refers to influent total dissolved solids.
Note:
0.1 MPa = 1.02 Kg/cm
2
= 14.5Psi
1 Psi = 0.07 Kg/cm 2
1 Gallon = 3.785 Liters
75 GPD = 75 Gallons/Day = 284 Liters/Day = 197 Milliliters/Minute
Technical Specifications
Model No.
Frequency
Voltage
Suitable Water Pressure
Inlet Temperature
Maximum Daily Water TDS Value
Flushing Method
Electric Shock Protection Type
Product Dimensions
Tank Dimensions
Weight
Suitable Water Quality
Power Rating
Daily Water Production Volume
Tank Volume
230V AC
50 Hz
38 W
0.1-0.35 MPa (1 Bar to 3,5 Bars)
5 ~38
˚
C
≤1000 PPM
Auto Flushing
75 Gallons, approximately 284 Liters
3.2 Gallons, approximately 12.1 Liters
Class II
Municipal tap water meeting the TS-266 standarts
LILY
460x488x161 mm
335x280 mm
14 kg