9
Conversion from Wall Mounting Installation to Floor Mounting
Step 1:
Factory default installation (wall hung).
Step 2:
Remove the cap and unscrew the Tank
bolt with the socket wrench. Unscrew the screw
and remove the Wall mount bracket and
Bracket support as shown in the below figure.
Step 3:
Turn 90 degrees and remove four floor
mounting caps.
Step 5:
Assembly finished depiction.
Step 6:
Floor installation.
Step 4:
Use four screws (accessories) to fix the
two Wall mount brackets in place.
Floor
mounting
cap
Note:
The Water Heater comes with default wall hung installation. The same should not be used for
floor mounting. Separate floor mounting accessories have been provided for floor mounting option.
Socket wrench
Step 2.1:
Remove
cap
Step 2.2:
Loosen Bolt
using Socket
wrench
Step 2.3:
Remove
Tank bolt
Step 2.4:
Remove
Screws using
Screw driver
Cap
Tank bolt
Wall mount
bracket
Bracket support
Screw