A.O. Smith Gen 8 Digital, Руководство пользователя

Страница: 18 / 19

Troubleshooting
Problem Possible causes Corrective action
Display is off
No hot water 1. No power to heater
2. No power at electric socket
3. Failure in control circuit or
internal wiring
1. Switch on power to heater
2. Check power socket
3. Contact local authorized
dealer
Display is off
High water temperature 1. High temperature limit switch
tripped
2. Electrical circuit failure
Switch off power supply and
contact local authorized dealer
Display on, no hot water Heating element or internal circuit
failure Contact local authorized dealer
Leaking from tank Leaking tank or components Switch off power supply and
contact local authorized dealer
Dripping from pipe joints Unsealed joints Reconnect pipes of the water
heater and be sure to use
sealant
Display “E0” Blue wire of two-core terminal
open circuit or short circuit Contact local authorized dealer
Display “E1” Red wire of two-core terminal
open circuit or short circuit Contact local authorized dealer
Display “E2” Black wire of two-core terminal
open circuit or short circuit Contact local authorized dealer
Display “E3” White wire of two-core terminal
open circuit or short circuit Contact local authorized dealer
Display “EH” High temperature Contact local authorized dealer
Display “EL” Low voltage protection Resume use when voltage is
normal
Display “EA” Relay circuit issue Switch off power supply and
contact local authorized dealer
Display ‘E-fault’ External grounding fault Switch off power supply and
contact local authorized dealer
Display ‘ ‘ Anode needs to be replaced Contact local authorized dealer
18