A.O. Smith CAWH 8-455-6, Инструкция по установке, эксплуатации и обслуживанию

Страница: 70 / 304

Communication
error NA No communication between main
control board and UIM. Contact a qualified installer or service
agency for repair. Refer to phone number
listed on the technical support label loca-
ted on the unit.
Upper contactor
error 794 No communication between the
main control board and upper ele-
ment contactor and or elements. 1. Turn off power at the breaker or dis-
connect switch and check for loose
connections at the contactors, main
board, and elements. If error per-
sists proceed to next step.
2. Replace contactor.
3. Replace main control board.
Crystal frequency
error 0C1 Power supply frequency (Hz) is too
high or too low. Check the power supply to the unit and
make sure the line frequency is between
56 Hz to 64 Hz.
EEPROM error 795 EEPROM failure Contact a qualified installer or service
agency for repair. Refer to phone number
listed on the technical support label loca-
ted on the unit.
68 Installation, Maintenance and Service part
EN