manualshive.com logo in svg

A.O. Smith BTH 120 Series, Руководство по обслуживанию

Поделиться
Скачать
A.O. Smith BTH 120 Series Скачать руководство пользователя страница 20

18

Servicing should only be performed by a Qualified Service Technician

CONTROL OVERVIEW

Interaction with the water heater controller is through an LCD display called the 

User Interface Module 

(UIM)

. This screen is also referred to as the 

“desktop”

 or 

“desktop menu”

. Up and down buttons and 

three operation buttons allow navigation through the control menus and to make adjustments to the water 
heater. Operation of the three lower buttons is defined immediately above them on the screen.

While the water heater is operating, the user interface will display the desktop screen (if there are no active 
faults or warnings).

An example of this screen is shown below.

• 

The first temperature on this screen is the temperature of the water inside the tank.

• 

The second temperature on this screen is the 

Operating Set Point

. The 

Operating Set Point

 is the 

temperature at which the water heater will maintain the water inside the tank.

• 

The third line on the screen is a text description of the Operational State of the water heater. The 
operational state of the water heater is also indicated graphically by status icons.

Содержание BTH 120 Series



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды