3. Remove packaging from the new filter
and insert it into the slot until you hear a
click.
4. When successfully installed, the
relevant filter indicator light display will
turn white. Proceed to close the cover,
aligning the magnets at the top first.
NOTE:
1. After replacing any of the filters, switch on the faucet and let the water run from the filter tap for 15
minutes before consuming the water.
1. If the filter indicator display does not light up in white, adjust the water purifier so that it is at least
2cm away from the sides of the housing cabinet. Then, remove the filter and reinstall it.
2. If the faucet stops dispensing water after any filter replacement, switch off the faucet and check that
the filter is properly connected.
