20
RS-232 CommandS
ANI-IN-DVS
Command Types
Command Codes
Functions
USER/I/[x]:02xx%;
Set the brightness of input [x] to xx, xx=00~99
USER/I/[x]:03xx%;
Set the contrast of input [x] to xx, xx=00~99
USER/I/[x]:04xx%;
Set the saturation of input [x] to xx, xx=00~99
USER/I/[x]:05xx%;
Set the sharpness of input [x] to xx, xx=00~99
USER/I/[x]:0606%;
(For 4I-DS/ VA) Auto-adjust VGA input signal
USER/I/[x]:0607%;
Set picture’s color temperature
USER/I/[x]:0608%;
Configure image scale
USER/I/[x]:0614%;
Configure picture mode
USER/I/[x]:0617%;
Restore input [x] to factory default.
USER/I/[x]:0619%;
Set the resolution of input [x] to 1360x768, HD
USER/I/[x]:0626%;
Set the resolution of input [x] to 1024x768, XGA
USER/I/[x]:0627%;
Set the resolution of input [x] to 1280x720, 720P
USER/I/[x]:0628%;
Set the resolution of input [x] to 1280x800, WXGA
USER/I/[x]:0629%;
Set the resolution of input [x] to 1920x1080, 1080P
USER/I/[x]:0620%;
Set the resolution of input [x] to 1920x1200, WUXGA
USER/I/[x]:0621%;
Set the resolution of input [x] to 1600x1200, UXGA
USER/I/[x]:0698%;
Software update
USER/I/[x]:0686%;
Set the output signal of input [x] to HDMI
USER/I/[x]:0687%;
Set the output signal of input [x] to DVI
ANI-OUT-DVS
Command Types
Command Codes
Functions
USER/O/[x]:0201%;
Set the input source of output [x] to YPbPr
USER/O/[x]:0202%;
Set the input source of output [x] to VGA
USER/O/[x]:0203%;
Set the input source of output [x] to C-VIDEO
USER/O/[x]:0804%;
Set the resolution of output [x] to 1280x720P @60Hz
USER/O/[x]:0813%;
Set the resolution of output [x] to 1280x1080P @60Hz
USER/O/[x]:0824%;
Set the resolution of output [x] to 1024x768 @60Hz
USER/O/[x]:0826%;
Set the resolution of output [x] to 1280x1024 @60Hz
USER/O/[x]:0837%;
Set the resolution of output [x] to 1920x1200 @60Hz
USER/O/[x]:0106%;
Switch on the HDCP compliance of output [x]
USER/O/[x]:0107%;
Switch off the HDCP compliance of output [x]
GetResolution[x].
Capture output resolution of output [x]
GetVGAPortMode[x].
Inquire the output status of VGA port [x]
USER/O/[x]:0617%;
Restore output [x] to factory default.
A
NEU
VIDEO
Commands for
Signal Cards
Commands for
Signal Cards