A-Neuvideo ANI-8-4K60-S, Инструкция по эксплуатации, Страница: 9 / 24

7
Web GUI User Guide
The Matrix can be controlled by Web GUI. The operation method is shown as below:
STEP 1: Get the current IP Address. The default IP address is 192.168.1.100. You can get the current Matrix IP address in two ways:
THE FIRST WAY: You can get the IP address via panel buttons. On
the initial OLED display, press “MENU” button to enter the IP interface,
then press “UP/DOWN” button to check the current IP address.
THE SECOND WAY: You can get the IP address via RS-232 control.
Send the command “ r ipconfig!” through an ASCII Command tool,
then you’ll get the feedback information as shown.
IP: 192.168.62.100 in the above figure is the IP Address of the Matrix
(the IP address is variable, depending on what the specific machine
returns). For the details of ASCII control, please refer to “RS-232
Control Commands” .
STEP 2: Connect the ETHERNET port of the Matrix to a PC with an UTP cable, and set the IP address of the PC to be in the same
network segment with the Matrix.
STEP 3: Input the IP address of the Matrix into your browser on the PC to enter Web GUI page.
After entering the Web GUI page, there will be a Login page, as shown below:
Select the Username from the list and enter the password. The
default passwords are:
Username: User Admin
Password: user admin
After entering the password, click the “LOGIN” button and the
following Status page will appear.
A NEU VIDEO