A-Neuvideo ANI-5MFS, Инструкция по эксплуатации

Страница: 12 / 20

10
Connection of Microphone
Connection of Microphone
The switcher provides one 2-level microphone input to accommodate different microphone input modes, including 48V phantom power
mode and MIC mode. When switched to “ON” (It has a good frequency characteristic, high input impedance and high sensitivity in this
mode), the MIC input will provide a 48V phantom power. This is only used for 48V condenser microphones.
q
UNBALANCED CONNECTION:
“+” and “ ” connect to ground, and “-” connects to signal. “-” and “ ” connect to ground, and “+” connects to signal.
w
BALANCED CONNECTIONS:
“+” connects to positive, “-” connects to negative and “ ” to ground.
When switched to “OFF” (It has a low frequency characteristics, and wide frequency response in this mode), the microphone input is used
for connecting dynamic microphones and electrets condenser microphone.
There are 2 different connections:
q
UNBALANCED CONNECTION:
“+” and “ ” connect to ground, and “-” connects to signal. “-” and “ ” connect to ground, and “+” connects to signal.
w
BALANCED CONNECTIONS:
“+” connects to positive, “-” connects to negative and “ ” connects to ground.
A NEU VIDEO