A-Neuvideo ANI-4MV, Инструкция по эксплуатации

Страница: 14 / 28

12
Operation of the Software
Main Function Settings
The main function area of the control software includes 4x Full Screen Zoom-In, 3x Full Screen Zoom-In, Matrix Switching, PiP (Picture
in Picture), PoP (Picture outside Picture), output image switching function and customizable shortcut buttons. The detailed information is
shown in
Figure 10.
Figure 10: Main Functional Area
Note:
When in any one of the (5) modes (4x Full Screen Zoom-In, 3x Full Screen Zoom-In, Matrix Switching, PiP, PoP), please note the
following...
1. When in distribution or matrix switching display modes, you can set the resolution of any single output by checking the option box full
mode and also set as the total resolution. The ability to make these changes is disabled in the other (4) modes.
2. It is not able to set the correspondences between the inputs (channel input switch) and the (4) outputs.
3. It is not able to set the overlay hierarchical relationship of a single input channel or to set the hierarchical relationship of all input channels.
4. When in PiP or PoP display modes, it is able to set the output display state. The ability to make these changes is disabled in the other
(4) modes.
5. It is not able to move the image on the currently displayed image area on the software interface.
4x Zoom-in Function (Video Wall)
FUNCTION:
To split a single input signal to (4) displays (Video Wall function), the input image is magnified by 4x, as shown in
Figure 11.
DETAILED OPERATIONS:
While the software is running, click on the button, the display mode area on the software interface will
show the output display mode of any one of the input channels. The (4) images on the menu make up a whole image, same as the input
image. The buttons are used for selecting the image from any one input channel.
3x Zoom-in Function (Vertical Video Wall)
FUNCTION:
To split a single input signal to (3) displays, the image is rotated 90 degrees, and then to be displayed side-by-side (Video
Wall). Generally there will not be an output image on the first output channel (the ANI-4MV shows a blue screen), and the images on the
second, third and fourth display are rotated 90 degrees to make up a whole image. As shown in
Figure 12
.
DETAILED OPERATIONS:
While the software is running, click on the button, the display mode area on the software interface will
show the output display mode of any one of the input channels. The (4) images on the menu make up a whole image same to the input
image. The buttons are used for selecting the image of any one input channel.
Matrix Switching Function
FUNCTION:
To choose one or all of the input images of the available (4) input channels and then output to the (4) output displays. As
shown in
Figure 13.
Choose the icon.
DETAILED OPERATIONS:
Click on the button, the display mode area on the software interface will show the output display mode
of any one of the input channels. The image of each display is the same as the corresponding input image. Click on the button, the
display mode area on the software interface will show the output display mode of only one of the input channels. The output images are
the same for each display as shown in
Figure 14.
A NEU VIDEO