A-Neuvideo ANI-0104POE, Инструкция по эксплуатации

Страница: 9 / 16

7
EDID Description
EDID Control
Under normal circumstances, a source device (digital and analog) will require information
about a connected device/display to assess what resolutions and features are available.
The source can then cater its output to send only resolutions and features that are
compatible with the attached device/display. This information is called EDID (Extended
Display Information Data). A source device can only accept and read one EDID from a
connected device/display. Likewise, the source can only transmit one resolution to be used
by the connected device/display. The EDID switch allows for EDID learning or for an EDID
pre-set to encourage a “handshake” between the display and source.
MANUAL EDID LEARNING MODE
When you switch to any number from “0-8” , the Transmitter will set a fixed EDID to the
source. For a detailed EDID description, please refer to the EDID table.
AUTO EDID LEARNING MODE
When you switch to “9” , the Transmitter will copy the HDMI LOOP output and display
EDID to source.
ATTENTION: Please confirm that the extender is working normally before modifying the
EDID. When you want to modify the EDID, change the EDID setting to the corresponding
number first and then power cycle the Transmitter.
DIP SWITCH EXAMPLE: The BLACK rectangles are used to represent the Dip Switch
pegs. In this example all the pegs are in the DOWN position showing position 0 for 1080p,
2CH Audio setting. Use the examples below to set the Dip Switch position for manual EDID
settings on the unit.