A-Neuvideo ANI-0104POE, Инструкция по эксплуатации

Страница: 11 / 16

9
RX Equalizer
RX Equalizer distance adjust
If you see a flickering or blinking image on the display, adjust the EQ switch to improve
the cable skew. MAX stands for the strongest HDMI signal level for the longest possible
transmission length. MIN stands for the weakest HDMI signal level for short transmission
length. Adjust the signal level from MIN to MAX until the desired video quality is displayed.
Adjustments can be made with the system installed and powered on. Allow ~4 minutes
between each adjustment.
RECOMMENDED EQ SETTINGS (Cable distances are approximate)
EDID TABLE:
CABLE LENGTH (IN FEET)
The BLACK rectangles are used to represent the Dip Switch pegs.
In this example all the pegs are in the DOWN position showing position 0.
EQ settings are Output port specific and do not transfer to other Output ports.
If you have good video/audio signal on one Output port and decide to move the CAT cable
to a different Output port, you may have to repeat the EQ setup procedure.
If you change CAT cables or change receivers, you may need to repeat the EQ setup
procedure.