A-Neu Video HD-44G, Инструкция по эксплуатации

Страница: 3 / 20

TABLE OF CONTENTS
A NEU VIDEO
1
CONTENTS
INTRODUCTION & PACKAGE CONTENTS ................................1
FEATURES & SPECIFICATIONS .................................................2
FRONT PANEL .............................................................................3
BACK PANEL ...............................................................................6
REMOTE CONTROL ....................................................................7
EDID FUNCTION .........................................................................9
RS-232 SERIAL INTERFACE ....................................................12
IR EXTENDER ......................................................................... 13
TYPICAL APPLICATION ............................................................14
INTRODUCTION
The HD-44G is professional 4x4 matrix routing switch. Supporting
(4) HDMI Inputs and (4) HDMI Outputs. The HD-44G is based
on HDMI standards and supports full resolution HDMI video with
embedded EDID. With a signal bandwidth of 225Mhz, there is no
signal degradation. High definition digital signals can be selected
and distributed from any of the (4) Inputs to any of the (4) Outputs
in any combination. This switcher is certified as being fully CEC
and HDCP 1.2 compliant and is full HD HDMI V1.3b compatible
with RoHS, CE, FCC certifications. Supports UXGA/WUXGA/DVI
1920x1200 resolutions to any HD display. Supports high resolution
HDMI sources routed to HDMI displays, monitors, projector or audio
receivers. The EDID management can be selected between (7)
different modes. Control is provided via front panel push buttons, IR
remote and RS-232. A RS-232 Windows GUI interface is provided
for matrix routing control (Windows only). This product has a 1 year
warranty.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
• HD-44G Matrix Switch
• RS-232 V2.0 Protocol Instructions
• Master wireless IR Remote Control (SW-HD44)
• 19 inch Ear mount bracket (Part # 1U-440L)
• HD-100 IR Extender Receiver Set
• CD Contents: Windows GUI, ISP V1.0 Windows driver
•
HDMI Locking Post Replacement Screws
• Users Guide
• Worldwide Universal Power Supply: DC12V, 3A
Input: (100~240VAC, AC50/60Hz)
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without the express written permission and consent.
© Copyright 2017. All Rights Reserved.
Version 2.6 OCT 2017
HD44G-20150912-003
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.