A-Neu Video HD-44G, Инструкция по эксплуатации

Страница: 14 / 20

12
A NEU VIDEO
ETHERNET & rs-232 SERIAL INTERFACE
ETHERNET / RS-232 SERIAL INTERFACE CONNECTS a PC or CONTROL SYSTEM
VERSION COMPATIBLE V2.0
For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.
Example of the commanded string to select Inputs:
Function Command Variables
Set channel status OUTPUTxx yy; xx = Output Channel
yy = Input Channel
Command Example Response Description
OUTPUT02 04; HD-44 00; Set output 2 to input 4
HD-44 01; UN-KNOW Command
ETHERNET SERIAL INTERFACE
Pin Ethernet Reference
1 TXOP TX +
2 TXON TX -
3 RXIP RX +
4 NC
5 NC
6 RXIN RX -
7 NC
8 GND
ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )
*** The Ethernet port and RS-232 port cannot be used simultaneously. Any connection to the Ethernet Control port will disable serial
commands sent to the RS-232 port.***
RS-232 Configuration
RS-232 cable is a straight thru cable and not null-modem
Definition Pin Pin Definition
1 1 DCD
TX 2 2 RX
RX 3 3 TX
4 4 DTR
GND 5 5 GND
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )
The HD-44G switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
system. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When
the unit recognizes a complete command it will perform the requested action - there is no delimiter character required.
Note: Control the switcher
SPD: Speed
LINK: Ethernet link
RJ-45 Female 8P-8C Connector
HD-44G
Device
PC
TCP, Port 5000