2
FEATURES
FEATURES
•
Compliant with HDMI 1.3a, HDCP 1.2
•
Supports multiplexed HDMI (4) inputs and (1) output
•
Support 4x1 Quad Multi-viewer and seamless switch
•
Support scaler up, scaler down function
•
Support digital audio format LPCM/AC3/DTS
•
Support button, IR, RS-232 etc. various controlled ways
•
IR system allowing for control of source at display end
•
Allows HDMI Audio/Video and IR signals to be transmitted over a single CAT5e/6 cable
•
Quad, Picture in Picture, and Full Screen display modes
• Quad Mode:
• In quad mode, the screen is split into (4) fields of equal size each displaying the entire contents of (4) different video sources
•
Fluid, real-time video performance with 60 frames per second (fps) in all (4) quadrants
• Full Screen Mode:
• In full screen mode, (1) of the (4) video sources is displayed in full screen size and maximum resolution
• Picture in Picture (PIP) Mode:
•
In PIP mode, the full screen display of (1) of the (4) video sources is accompanied by (3) small images (thumbnails) of the (3)
other video sources on the right hand margin of the screen allowing simultaneous monitoring. Independent video in to video out
resolution
•
Supports HDTV resolutions up to 1080p and computer resolutions to 1920x1200
• HDMI features supported:
• Inputs: 24, 30, and 36bit xvYCC, sRGB, and YCbCr
• Outputs: 24 and 30bit sRGB
•
(4) channel non-mixing or (1) channel mixing stereo with 16, 20, or 24bit uncompressed PCM audio
• Bandwidth up to 165 MHz
• Inputs: 2.25 Gbps
• Output: 2.0625 Gbps
•
Fluid, real-time video performance with (60) frames per second (fps) in all (4) quadrants
•
Switch audio independently of video from connected HDMI sources in Quad mode
•
Control the multiviewer through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS-232
•
Bi-directional IR control from multiviewer and remote unit locations
•
Cascade multiviewers to display video from any number of video sources on (1) screen
• Each unit in the cascade must be configured and controlled individually
•
Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels
of the cascade does not exceed 250 feet
•
Adjust output video brightness, contrast, color, and sharpness
•
Supports simultaneous local and remote HDMI output
•
Features coax SPDIF audio outputs at the multiviewer and receiver
•
Built-in default EDID table
•
Supported output resolutions can be selected
•
ARC (Audio Return Channel) support at the receiver unit via coax SPDIF output for speakers
•
Turn ARC on to play audio from an HDTV with ARC support to the connected speakers
•
Turn ARC off to play audio from the multiviewer source to the connected speakers
