A-Neu Video ANI-1x2COMPDA, Инструкция по эксплуатации

Страница: 3 / 8

TABLE OF CONTENTS
A NEU VIDEO
1
CONTENTS
INTRODUCTION ............................................................................1
PACKAGE CONTENTS .................................................................1
FEATURES .................................................................................... 2
SPECIFICATIONS ......................................................................... 2
TYPICAL HOOKUP & OPERATION...............................................3
CONNECTION DIAGRAM.............................................................3
INTRODUCTION
Congratulations on your purchase of the ANI-1X2COMPDA a (1)
Input to (2) Outputs Component Video Distribution Amplifier with
Digital Coaxial/Optical Audio. This product can be used to distribute
video and audio signals to multiple destinations. This product
provides multiple outputs that are identical to the source signal.
It is useful for distributing signals from VCRs, Camcorders, Video
Game Consoles, DVDs, Satellite Receivers, CAT5 Set Top Boxes,
etc. The ANI-1X2COMPDA can also be cascaded.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
• ANI-1X2COMPDA Distribution Amplifier
•
Users Guide
• AC/DC Adapter: 5V@1A
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without the express written permission and consent.
© Copyright 2016. All Rights Reserved.
Version 2.2 JULY 2016
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.