WebGUI Control
Video Switch
This page provides video routing settings including HDCP and test pattern configuration.
Output and Input Routing
To begin assigning a new video route, please click the
button of the HDBaseT
™
output you wish to send video
to (e.g.
“HDBT_Out A”
) and then click on the button of
the preferred HDMI input port (e.g.
“HDMI_In 1”
).
If desired, you may select more than one output prior to
selecting the input. As you select each button they will
change their color to orange. The new route will become
active immediately and the routing information displayed
on the buttons will change accordingly.
If you need to route an input to multiple outputs, please
select all of the appropriate output buttons before
selecting the input port.
Output and Input Naming
All inputs and outputs can be renamed as required. To
rename the HDBaseT
™
output ports and HDMI input
ports please click the
“edit”
icon ( ). Click the
“Save”
button to confirm the change.
NOTE:
Blank spaces (“ ”) are not allowed in names.
A
NEU
VIDEO
21
