4
5
6
7
8
9
10
11
12
13
ENG
LISH
ANTMIX Series
| User manual
10
11
SERIES
User manual
|
ANTMIX
Series
4 AUX - 12FX ONLY
This knob adjusts the signal sent to AUX SEND.
Use it to connect the mixer to an additional effects unit or to
stage monitors.
5 PRE/POST - 12FX ONLY
This selector determines whether the AUX send level is
independent (PRE) or is influenced (POST) by the channel
level control.
Generally it's used PRE to send the signal to stage monitors or
IEM, POST to send the signal to an external effect unit.
6 DFX POST
This send, influenced by the individual channel level control,
adjusts the signal sent to the internal effects or to an external
effects connected to DFX SEND output.
7 BAL
The BAL knob sets the left-right balance for stereo channels.
If only one signal is connected to the L/MONO socket, this knob
acts like a PAN.
8 MUTE & LED - 12FX ONLY
Press this button to mute the selected channel source.
The lit LED indicates the MUTE activation.
9 PFL & LED - 12FX ONLY
Press this button to check channel signal level before the fader.
It works also if the channel is muted; the led indicates the
activation of the command.
10 PEAK
This LED is lit when the input signal is very loud and
is close to distortion.
When the LED is continuously lit, please lower the
input gain or adjust channel EQ, so reducing the boost
introduced by HI, MID, and LOW gains.
11 GR 1-2 - 12FX ONLY
Press this button to send the channel signal to GROUP
OUT 1-2 outputs.
12 L-R - 12FX ONLY
Press this button to send the channel signal to MAIN
MIX L-R outputs.
13 LEVEL
Use this knob (6FX) or this fader (8FX & 12FX) to
adjust channel volume.
