Getting Started
Fully charge your SPzero before initial use. Use the included Micro-USB
cable to connect your SPzero to a USB slot of any PC or USB Wall Charger
to charge. The RED LED will turn on while charging and will turn off
automatically when fully charged.
Push and hold the center button for 5-8 seconds until the LED constantly
flashes in White and you will hear a voice prompt. You are now in Pairing
Mode. See your phone/music device manual for pairing instructions. You
will hear a voice prompt when the device is paired.
Pairing Mode
LED Indicator
Function button indicator
EN
EN
LED Color
Description
White flashing in every 1 sec.
Power ON
Red flashing in every 1 sec.
Power OFF
White flashing in every 1 sec.
Standby
White flashing in every 0.1 sec.
Pairing
White flashing in every 5 sec.
Connected
White flashing in every 1 sec.
Disconnect
Red flashing in every 0.1 sec.
Low Power (standby)
Red light on
Charging
Behavior
Description
Press and hold in 5 sec.
Power turn on/off
Press and hold in 8 sec.
Pairing
Press MFB 1x
Answer/End call
Press and Hold in 3 sec.
Reject call
Press MFB 2x
(Siri—iPhone only)
Press MFB 1x
Play/Pause music
LED Indicator
/ -
Function
Mic
Micro USB Charging
Port (DC 5V)
AUX Input
AUX Output
Left & Right button indicator
Behavior
Description
- increase; - decrease
Adjust Volume
+
-
