A-Link WNAP, Руководство пользователя

Страница: 36 / 102

USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 2.0
27
3.3.9 Mesh Settings
Mesh network uses wireless media to communicate with other APs, like the
Ethernet does. To do this, you must set the APs in the same channel with the
same Mesh ID. The APs should be under AP+MESH/MESH mode.
Screen snapshot – WDS Setup
Item Description
Enable Mesh Click Checkbox to enable wireless Mesh function
Mesh ID It is the wireless Mesh name. The SSID can be 32 bytes long.
Encryption Select the encryption supported over wireless access. The encryption
method can be None or WPA2(AES)
Pre-Shared Key
Formate
Select the Pre-shared key format from the pull-down menu. The format
can be Passphrase or Hex (64 characters).
Pre-Shared Key Fill in the key value.
Apply Changes Click the Apply Changes button to register the AP to new configuration.
Reset Click the Reset button to abort change and recover the previous
configuration.
Set Access Control It is only used for advanced users to setup the access control rules of
MPs. When click the “Set Access Control” button, the “Access Control
List for Mesh Network” page is presented.
Show Advanced
Information
Advanced users could click the “Show Advanced Information” button to
access the “Wireless Mesh Network Information” page for detailed
information of current mesh network.