A-Link WNAP, Руководство пользователя

Страница: 33 / 102

USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 2.0
24
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other
APs, like the Ethernet does. To do this, you must set these APs in the same
channel and set MAC address of other AP that you want to communicate with in
the table and then enable the WDS.
Screen snapshot – WDS Setup
Item Description
Enable WDS Click the check box to enable wireless distribution system. Refer to 4.21 What
is Wireless Distribution System (WDS)?
MAC Address Fill in the MAC address of AP to register the WDS access capability.
Data Rate Select the transmission data rate from pull-down menu. Data rate can be
auto-select, 1M to 54Mbps or MCS.
Comment Fill in the comment tag for the registered AP.
Apply Changes Click the Apply Changes button to register the AP to new configuration setting.
Reset Click the Reset button to abort change and recover the previous configuration.
Set Security Click button to configure wireless security like WEP(64bits), WEP(128bits),
WPA(TKIP), WPA2(AES) or None
Show Statistics It shows the TX, RX packets, rate statistics
Delete Selected Click to delete the selected clients that will be removed from the WDS.
Delete All Click to delete all the registered APs from the WDS allowed list.
Reset Click the Reset button to abort change and recover the previous configuration.