2. Physical Installation
2.1 IP Camera Connectors
RJ45 Socket
Please use Category 5 “straight through” cable to connect the Network Camera to a
100Mbps Fast Ethernet network switch or hub or PoE injector.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power or Wireless LED (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will
be flashing while the wireless accessing of the Camera.
DI/ DO
Connect to sensor in and alarm out devices.
Cable for I/O connectors:
Name
Cable Color
Function
12VDC
Brown/White
DC 12V (50mA maximum)
GND
Blue/White
GND
NC
Purple/White
Do not connect
NC
Gray
Do not connect
DI
Green/White
Digital signal input
DO
Orange/White Digital signal (alarm) output
Factory Default Reset
This button is
used to restore the all factory default settings. Press reset button about 5
seconds to reset IP camera factory defaults.
4
