SecuGuard Basic V.5
1. Main-console
59
Step 1
：
Select the camera which you want to add event.
Step 2
：
Click “Add” button to approach Alarm Event Selection dialog.
Step 3
：
Select the Event that you want to add, then click OK button, or double-click on
the Event to add it.
Step 4
：
The selected Event will add into the specified camera.
1.9.2 Event Setting / Edit Event:
Step 1
：
Select the Event which you want to modify.
Step 2
：
Click the “Edit” button or double-click the Event which was selected.
Step 3
：
Configure the event setting, then click OK button to save setting , or click
cancel button to cancel edit job.
Please refer the sections below to check detail information of event setting.
