A.J.Antunes UTX-200, Руководство пользователя

Страница: 11 / 36

UNIVERSAL TOASTER UTX-200
11 P/N 1010904 Rev. 14 04/06
McDonald’s
OPERATION (continued)
Universal Toaster Settings
The following tables shows the recommended settings
for the UTX-200 Universal Toaster:
LUNCH
Setting Value (Mfg.
Nos 9210800 &
802)
Value (Mfg.
No. 9210810)
Bun Thickness
Compression Control
knob
3 3
Platen Temperature 570° F 570° F
IR Percent Upper 60% 60%
IR Percent Lower 0% 0%
Lunch Speed
(17 Seconds)
6480 5280
MUFFIN
Setting Value (Mfg.
Nos 9210800
& 802
Value (Mfg.
No. 9210810)
IR Percent Upper 80% 80%
IR Percent Lower 50% 50%
Muffin toasting speed
(95 seconds).
200 180
BAGEL
Setting Value (Mfg.
Nos 9210800
& 802
Value (Mfg.
No. 9210810)
IR Percent Upper 80% 80%
IR Percent Lower 50% 50%
Bagel toasting speed
(55 seconds)
340 280
NOTE: It is recommended that these settings
remain unchanged.
The Bagel and Muffin Program use the following three
settings:
• Speed
• IR Lower%
• IR Upper %
The Lunch Program uses the following four settings:
• Speed
• Platen Temp
• IR Lower %
• IR Upper %
UTX-200 Unit Status Mode
This mode provides feedback on how the unit systems
are performing. No adjustments can be made in this
mode. Also, the display will remain on the selected
screen in this mode until you switch screens or exit Unit
Status Mode.
Press the PRGM button once to exit Unit Status Mode
and return to the current operation mode screen.
Follow these steps to view the Unit Status mode.
1. From any operation mode (
Bagel Ready
,
Bagel
Wait , Muffin Ready , Muffin Wait , Lunch
Ready or Lunch Wait ), open the Front Cover
and press and hold the ADJUST button for 3 sec-
onds.
2. The following appears on the display in sequence
(use the NEXT and PREV buttons to scroll
through these items):
•
Temp-Platen-Set Pt
•
Total Hours
•
Over Temp Sense
(temperature of the air com-
ing out of the blower)
• Ambient (air temperature inside the electrical
enclosure)
• Fan Speed % of Normal
L: (Left Fan), C: (Center Fan), R: (Right Fan)
• Speed-Motor-Set-Pt
•
Lower IR
(The set point temperature appears on
the top line. The actual temperature appears on
the lower line)
•
Upper IR
(The set point temperature appears on
the top line. The actual temperature appears on
the lower line)