SURFACE STEAMER SS-400TT
4
P/N 1011073 Rev. H 12/13
McDonald’s
A.J. Antunes & Co.
Throughout this manual, you will find the following safety words and symbols that signify important safety
issues with regards to operating or maintaining the equipment.
WARNING
GENERAL WARNING. Indicates information impor-
tant to the proper operation of the equipment.
Failure to observe may result in equipment dam-
age and/or severe bodily injury or death.
WARNING
ELECTRICAL WARNING. Indicates information
relating to possible shock hazard. Failure to
observe may result in damage to the equipment
and/or severe bodily injury or death.
CAUTION
GENERAL CAUTION. Indicates information impor-
tant to the proper operation of the equipment.
Failure to observe may result in damage to the
equipment.
WARNING
HOT SURFACE WARNING. Indicates information
important to the handling of equipment and parts.
Failure to observe may result in personal injury.
IMPORTANT SAFETY INFORMATION
In addition to the warnings and cautions in this manual,
use the following guidelines for safe operation of the unit:
• Read all instructions before using equipment.
• For your safety, the equipment is furnished with
a properly grounded cord connector. Do NOT
attempt to defeat the grounded connector.
• Install or locate the equipment only for its intend-
ed use as described in this manual. Do NOT use
corrosive chemicals in this equipment.
• Do NOT operate this equipment if it has a dam-
aged cord or plug, if it is not working properly, or
if it has been damaged or dropped.
• This equipment should be serviced by qualified
personnel only. Contact the nearest Authorized
Service Agency for adjustment or repair.
• Do NOT block or cover any openings on the unit.
• Do NOT immerse the cord or plug in water.
• Keep cord away from heated surfaces.
• Do NOT allow the cord to hang over edge of table
or counter.
The following warnings and cautions appear throughout
this manual and should be carefully observed.
• Turn the power off, disconnect the power source,
and allow unit to cool down before performing any
service or maintenance.
• The procedures in this chapter may include the
use of chemical products. These chemical prod-
ucts will be highlighted with bold face
letters followed by the abbreviated
HCS
(Hazard
Communication Standard). See Hazard
Communication Standard manual for the appro-
priated Material Safety Data Sheets (MSDS).
• The equipment should be grounded according to
local electrical codes to prevent the possibility of
electrical shock. It requires a grounded recep-
tacle with separate electrical lines, protected by
fuses or circuit breaker of the proper rating.
CAUTION
All electrical connections must be in accordance
with local electrical codes and any other appli-
cable codes.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
WARNING
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent, or a simi-
larly qualified person in order to avoid a hazard.