A.J.Antunes HCT-5H, Руководство пользователя

Страница: 8 / 24

HCT-5H BUN TOASTER
8
A.J. Antunes & Co.
P/N 1011256 Rev. B 03/15
McDonald’s
Daily Cleaning
CLEAN AND SANITIZE TOASTER AND BELTS (DAILY)
1. Press and release the Power Button to turn the
toaster off. The toaster enters a cool-down mode
and automatically shuts down when complete.
NOTE: You do NOT need to wait for the cool down
to complete.
2. Put on neoprene gloves. Remove the Bun
Feeder, Crumb Tray, and Bun Buffer Frame
(Figure 4).
3. Clean the outside surfaces of the toaster with
a paper towel sprayed with an approved multi-
surface cleaner. Allow to air dry.
4. Wash the Bun Feeder, Crumb Tray, and Bun
Buffer Frame at the three-compartment sink.
Allow to air dry.
5. Reattach the Bun Feeder, Crumb Tray, and Bun
Buffer Frame.
6. Plug the power cord into the appropriate outlet.
Press and release the Power Button to turn the
unit on. Return to normal operation.
7. Lift the front door to inspect the belts (Figure 4).
Replace any Belts that are torn, folded, discol-
ored, missing snaps, or damaged in any way.
NOTE: The conveyors continue to turn during the
cool-down period, allowing you to clean the entire
Belt.
8. If the Belts are all in good condition, spray a
clean, sanitized towel with an approved multi-sur-
face cleaner. Wipe all of the Belts clean for two
revolutions of the belts.
NOTE: You may need to wipe the Belts more two
rotations.
8. Next, spray a clean, sanitized towel with an
approved sanitizer. Wipe both Belts for two revo-
lutions.
7. Re-install the Bun Feeder, Crumb Tray, and Bun
Buffer Frame.
8. Press and release the Power Button to turn the
toaster on. Return to normal operation.
MAINTENANCE
Figure 4. HCT-5H Components
Bun Buffer Frame
Bun Feeder
Crumb Tray
NOTE: Be sure to clean and sanitize the Belts com-
pletely. Improper cleaning shortens the life of the
Belts and results in poor toaster performance.
NOTE: Replace any Belts that show excessive
wear and tear. To obtain new Belts, contact your
Distribution Center (DC).
NOTE: Belts should be removed ONLY during Belt
replacement or when required in a service situation.
NOTE: We recommend that Belts be replaced every
quarter.
Front Door