background image

HCT-5H BUN TOASTER

1

A.J. Antunes & Co.

P/N 1011256 Rev. B 03/15 

McDonald’s

HORIZONTAL CONTACT TOASTER  

HCT-5H 

MFG. NO. 9210850

A.J. Antunes & Co.

Place this manual in the Toaster section  

of your 

Equipment Manual. 

Manufactured exclusively for 

McDONALD’S® 

BY

 

A.J. ANTUNES & CO. 

180 KEHOE BLVD. 

CAROL STREAM, ILLINOIS 60188, U.S.A. 

PHONE: 1-630-784-1000 

TOLL FREE: 1-877-392-7854 

FAX: 1-630-784-1650 

www.ajantunes.com

TABLE OF CONTENTS

This manual is for the exclusive use of licensees and employees of McDonald’s Systems, Inc..  

© McDonald’s Corporation  All Rights Reserved

Owner Information .....................................................2

General ......................................................................2

Service/Technical Assistance ....................................2

Warranty Information .................................................2

Specifications .............................................................3

Electrical Specifications & Plug Configuration ..........3

Pass Through Time ...................................................3

Dimensions ................................................................3

Important Safety Information ....................................4

Installation ...................................................................5

Unpacking ..................................................................5

Location .....................................................................5

Operation .....................................................................6

Operating Instructions ...............................................6

Language Selection ...................................................6

Programming ..............................................................7

Control Panel .............................................................7

Settings ......................................................................7

Light/Dark Adjustment ...............................................7

Purging Product from Toaster ....................................7

Factory Reset ............................................................7

Maintenance ................................................................8

Daily Cleaning ...........................................................8

Quarterly Maintenance ..............................................9

Troubleshooting .......................................................12

Replacement Parts ...................................................16

Wiring Diagram .........................................................21

Notes..........................................................................22

LIMITED WARRANTY

The Antunes Food Service Equipment Division of A.J. Antunes & Co. provides the following limited warranty to the original purchaser of all McDonald’s Equipment. 

All components are warranted against defects in the material and workmanship for a period of two (2) years from date of original installation. 

 

If any part becomes defective during the period of this Warranty, Antunes Food Service will pay labor costs to an Authorized Service Agent to replace the part plus 

travel expenses. 

Antunes Food Service reserves the right to make changes in design or add improvements on any products.  The right is always reserved to modify Equipment 

because of factors beyond our control and government regulation.  Changes to Equipment do not constitute a warranty charge. 

This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular 

purpose, each of which is expressly disclaimed.  The remedies described above are exclusive, and in no event shall A.J. Antunes & Co. or any of its Divisions be 

liable for special consequential or incidental damages for the breach or delay in the performance of this warranty.

WARRANTY EXCLUSIONS

•  The cost of Installation.

•  Equipment that has been damaged due to shipment.  Purchaser should 

make damage claim directly upon carrier.

•  Alteration, misuse, abuse.

•  Improper storage or handling.

•  Improper maintenance.

•  Failure to follow proper Installation instructions, including electrical  

connection.

•  Improper or unauthorized repairs.

•  Scheduled Maintenance procedures as outlined in your MRC Card.

•  This Warranty does not cover Consumable items. 

NOTE

: The Conveyor Belt 

wraps are consumable items that can be easily adjusted or replaced accord-

ing to the Maintenance Section of this product’s Owner’s Manual. 

•  Water pressure problems or contamination problems such as foreign material 

in water lines or inside solenoid valves due to an incoming water source.

•  Freight, foreign, excise, municipal or other sales or use taxes.

•  Consequential damages such as loss of profit, loss of time, the cost of repair-

ing or replacing other property which is damaged, or any other incidental 

damage of any kind.

Scan with mobile device or enter URL

for product and service information.

A.J. Antunes & Co.

HCT-5H & HRT-5H

http://tiny.cc/ajaHCT-HRT

Содержание 9210850

























Отзывы: