A.E.B. AEB150, Инструкция по установке и гарантийный талон, Страница: 9 / 28

IS150U Rev. 011203 - 0
9 - 28
English
General Warnings
- Install in an upright position far from any possible infiltration
of water.
- Install far from any sources of excessive heat (eg. exhaust
manifold).
- Install far from the ignition coil and pass the wiring far from
the high voltage cables.
- Make good electrical connections without using a “current
tap.” .
Bear in mind that the best connection is duly insulated
welding.
- Never open the emulator box for any reason whatsoever,
especially with the engine running or the panel switched on.
A.E.B. S.r.l. disclaims all liability for any damage or injury
deriving from unauthorized personnel tampering with its
device.
ATTENTION!
When running on GAS the emulator blocks and simulates the injectors,
while the electric GASOLINE pump stays in operation. It is therefore
important there is always GASOLINE in the GASOLINE tank to prevent
the pump overheating and getting irreparably damaged.