A. & H. Meyer GmbH
Phone: +49 5265 – 9488-0
www.ah-meyer.de
07.07.2021
Loosen the connector
:
The connection of the "NETBOX" is managed via connectors.
According to DIN VDE 0627, the connection must be disconnected from the mains before releasing the con-
nector. The following chart indicates the procedure.
1. Disconnect the plug from the power supply.
2. Push a screwdriver centered between the con-
nector and the locking of the "NETBOX".
Lift the screwdriver slowly upwards, contrary to the
extraction direction of the connector.
3. Unplug the connector from the “NETBOX”.
