8e6 Technologies Enterprise Filter Authentication R3000, Руководство пользователя

Страница: 217 / 594

G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM SCREEN
8
E
6 T
ECHNOLOGIES
, R3000 E
NTERPRISE
F
ILTER
U
SER
G
UIDE
193
Enable SNMP
The Monitoring mode is “Off” by default. To enable SNMP,
click Enable in the Monitoring Mode frame. As a result, all
elements in this window become activated.
Specify Monitoring Settings
Set up Community Token for Public Access
Enter the password to be used as the Community token
for public access . This is the password that the manage-
ment R3000 console would use when requesting access.
Create, Build the Access Control List
1. In the Enter new IP to add field, enter the IP address of
an interface from/to which the SNMP should receive/
send data.
2. Click Add to include the entry in the Access control list
box.
Repeat steps 1 and 2 for each IP address to be included
in the list.
3. After all entries are made, click Save Changes .
Maintain the Access Control List
1. To remove one or more IP addresses from the list, select
each IP address from the Access control list, using the
Ctrl key for multiple selections.
2. Click Delete .
3. Click Save Changes .