7th Sense DeltaServer Скачать руководство пользователя | Manualshive

Страница: 36 / 60

background image

36

MC258-2 Device Control with DeltaServer : User Guide

© 2023 7thSense

Using 7thUDP2TCP for Device Control

Remember that this app needs to run in the background whilst your show is running if you are to
trigger communications with the TCP devices:

do not Exit the app

.

Note

: As you send the command from Delta (whether via sequence or timeline-based UDP

command), you will increment the Packets Rx. The Packets Tx value only increments if the
command is actually sent somewhere.If you need the ability to parse return (such as 00QPW), you
will need to use the HTTP API to parse the feedback: please contact [email protected] for
further advice on this functionality.

Setup Instructions for 7thSense 3D Sync using Labjack

This section describes the configuration of hardware and software used to synchronize multiple
servers in a 3D application. Information is provided to allow verification of correct operation. It also
describes the additional hardware used to synchronize multiple servers in a 3D application. Wiring
information is provided to allow fault finding if necessary.

Please note:

From 2020 7thSense deprecated the terms master and slave for the dependencies

between devices. We now refer throughout to ‘Leader’ and ‘Follower’ in our products.

To maintain functionality, both terminologies continue to work internally, but our documentation no
longer uses the former terms. Users of pre-2020 products will need to observe the equivalence and
continue to use the previous legacy terms.

Hardware Connectivity

USB cable:

Connect between USB ports on the LabJack unit and the Leader server.

LabJack 3D Sync Cable Assembly

·

15-way D Plug connects to the LabJack unit.

·

Mini-DIN plug marked ‘M’ to the Leader server graphics card’s 3D sync connector.

·

Mini-DIN plug marked ‘S’ to the Follower server graphics card’s 3D sync connector. Where more
than 1 Follower server is in use, the Mini-DIN plug marked ‘S1’ goes to the 1st Follower server
graphics card’s 3D sync connector, the Mini-DIN plug marked ‘S2’ to the 2nd Follower server, and
so on.

·

BNC plug to the 3D glasses emitter or projector, as required.

«
...
34
35
36
37
38
...
»

Содержание DeltaServer





























































Отзывы:

Нет отзывов

Похожие инструкции для DeltaServer

TotalStorageFAStT900

Бренд: IBM Страницы: 112

IP-DECT SERVER 6500

Бренд: SpectraLink Страницы: 126

Бренд: Artesyn Embedded Technology Страницы: 2

DIRECTORY SERVER 7.1 SP7 - S

Бренд: Red Hat Страницы: 12

Бренд: GeoVision Страницы: 73

Бренд: Master Digit Страницы: 15

Бренд: AMX Страницы: 35

Бренд: CTC Union Страницы: 40

A+ SERVER 2022TG-HIBQRF

Бренд: Supero Страницы: 107

Бренд: Intel Страницы: 10

Бренд: SONNETEER Страницы: 25

Бренд: Oracle Страницы: 204

Бренд: XCell Страницы: 92

Бренд: Oracle Страницы: 118

Бренд: hager Страницы: 4

CONTENT SERVER D13898.04

Бренд: TANDBERG Страницы: 143

System x3755 M3 7164

Бренд: IBM Страницы: 15

Бренд: IBM Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды