7links PE-8074, Руководство пользователя

Страница: 113 / 170

113
User Manual v1.3
Wireless
The Palm Server Router enables fastest 54 Mbps IEEE802.11g wireless transmissions and
keeps compatibility with existing IEEE 802.11b devices. The Palm Server Router complies
with IEEE 802.11b standard.
Please s
elect Wireless under the main menu. Follow the
instructions to enter the Wireless settings to configure the settings you want.
1. Wireless
Select AP/Bridge or WDS to allow or disallow Wireless operating.
2. Wireless Mode
This field indicates the 802.11g interface mode. “802.11G” prevents the 802.11b clients
from accessing the router. “802.11B/G” allows both 802.11b and 802.11g clients to
access the router. “802.11B” will enable the network as an 802.11b wireless network. By
default, the Mode is “
802.11B/G ”.
3. ESSID
You can use the default ESSID and radio channel unless more than one Palm Server
Router or access points are deployed in the same area. Under this situation, it is advised
that you should use a different ESSID and radio channel for each of Palm Server Router
or access point in order to distinguish from each other. All of the Palm Server Routers and
your wireless LAN card must have the same ESSID to allow a wireless mobile client
roaming between Palm Server Routers. By default, the ESSID is set to
“
Palm_Server_Router ”.
4. TX Rate
Select the transmission rate for the network. The default setting is Autoing
5. Channel
IEEE 802.11g and 802.11b devices are direct sequence spread spectrum devices that
spread a radio signal over a range of frequencies. The range of frequencies used by a
direct sequence device is called Channel.
The 802.11g and 802.11b specification supports up to 14 overlapping Channels for radio
communication. But only 11 Channels are supported in the United States and therefore
built-in on Palm Server Router. To minimize interference, configure each Palm Server
Router to use Non-overlapping channels. Non-overlapping channels have 25 MHz