background image

11

12

Note before the use of lithium battery

• Before use, please confirm that the battery model is the original one of the E-bike; Do not use other batteries 

of other brands arbitrarily;

• Check and confirm that the lithium battery has good appearance, without obvious phenomena, such as 

damage, leakage, heat, soaking, or smoking, etc;

• In order to ensure safe transportation, the battery usually keeps a power quantity of about 30%. But due to 

the self-consumption during transportation and storage cycle, the power is low or no power when using it for

the first time, which is normal. Please don't worry about that and recharge it by following the charging instructions.

Usage Environment

Warning

• The best usage environment is at 10℃- 45℃;

• At low temperature, the available capacity of lithium battery will be attenuated to varying degrees. The 

specific values are as follows: The available capacity is about 70% at -10°C, that is about 85% at 0°C and that is 

about 100% at 25°C; In case of any abnormal conditions of the battery, such as peculiar smell, heat or 

deformation, etc., please stop using it immediately, stay away from it and contact the after-sales department.

Storage Environment

• The battery power will be consumed from time to time in case of installing it in the E-bike body. So after the 

E-bike is not used for a period of time, it is normal for the instrument to show a drop of power;

• Please store the battery at an ambient temperature of 0°C - 25°C. Please do not store it in an environment 

higher than 45°C, otherwise it will cause irreversible capacity degradation;

• In case of not using the E-bike for a long time (such as in winter, summer or other special circumstances), the 

battery must be removed and stored separately, and maintained and charged regularly, otherwise it may cause 

the battery to be completely exhausted and cause irreversible damages. For this, battery fault is not within the 

scope of “Three Guarantees” policy;

• The most suitable storage capacity of the battery is 50%. In the event that the E-bike is stored for a long time

 under the conditions of keeping capacity lower than 10% or higher than 90%, it will cause irreversible capacity degradation;

•Do not store the battery in risky locations. Dropping may cause uncontrollable damage to the battery interior

 and may cause the battery to leak, heat up, smoke, catch a fire or explode.

The battery cannot be maintained and repaired by the user. In case of any abnormal 

conditions, please contact the after-sales department for overhaul. In addition, the “

Three Guarantees” policy will not be available in case of disassembling the battery 

without permission, and it may cause the battery to heat up, smoke, catch a fire or explode.

9. About Battery 

Special note: The function 

of locking the E-bike can 

only guarantee that the 

E-bike cannot run normally. 

Since the whole E-bile is 

light in weight and is 

composed of mechanical 

parts that can be 

disassembled with 

corresponding tools, we 

cannot ensure that your

 E-bile will not be stolen. 

Please keep your E-bike 

within sight or lock it 

together with mechanical 

and fixture objects.。

*The actual content shall be 

subject to the display 

interface of APP. 

  Power quantity display

 Pedal frequency

Current speed

Single calories

Speed gear

 Lock the E-bike

Headlight

 Auto Lock

Speed unit

 Boost level

Status

Содержание TDR01Z














Отзывы: