A U X M O D E
R E S E T F U N C T I O N
The
AUX
jack is for connecting an external audio device to enhance sound.
To do this, connect an external source to the
AUX
line-in input on the front
panel. After connecting the equipment by successive pressing the button
on the front panel, select the
AUX
mode. If connected correctly, the audio
signal from an external source will be transmitted through the acoustics of
the head unit. This makes it possible to adjust the volume and sound
quality. For example, you can connect an
MP3
player to listen to audio
through the car speakers.
The
RESET
button can be activated using a ballpoint pen or a thin metal
tool. This option may be
required in the following cases:
First installation, after connecting all wires.
None of the control buttons work.
The message
ERROR
on the display.
Turn on the receiver and use your BT-enabled mobile device to search for
CAR-BT. If necessary, enter “0000” after detection.
After pairing, the device will display
The device supports A2DP exchange protocol.
To start playing / pausing music, press the button
1/
Press the button to answer the call. The display will show
To end the conversation, press the button
To switch between BT and mobile device during a call, press the button
1/
To call the last person in the call list, press and hold the button
After disconnecting, the device will display
B T M O D E
14
