4xem BBPCHOME, Руководство пользователя

Страница: 49 / 77

BIOS Configuration
Quick Power On Self Test : This will skip some diagnostic checks
during the Power On Self Test (POST) to speed up the booting
process. The default setting is “Enabled”.
First/Second/Third Boot Device : Use these three items to select
the priority and order of the devices that your system searches for an
operating system at start-up time. The default settings are “Floppy”,
“HDD-0”, or “LS120” respectively. If you want to boot up the
system from S_ATA then you should choose the “SCSI” option.
Boot Other Device : If you enable this item, the system will search
all other possible locations for an operating system if it fails to find
one in the devices specified under the First, Second, and Third boot
devices. The default setting is “Enabled”.
Swap Floppy Drive : If you have two floppy diskette drives in your
system, this item allows you to swap the assigned drive letters so that
drive A becomes drive B, and drive B becomes drive A. The default
setting is “Disabled”.
Boot Up Floppy Seek : If this item is enabled, it checks the
geometry of the floppy disk drives at start-up time. You don’t need
to enable this item unless you have an old diskette drive with 360K
capacity. The default setting is “Enabled”.
Boot Up Numlock Status : If set to “Off,” the cursor controls will
function on the numeric keypad. The default setting is “On”.
Gate A20 Option : This option accesses memory above 1 MB using
the fast gate A20 line when set to “Fast” (default). The other option
is “Normal.”
Advanced BIOS Features
41