6
INSTALLATION
Roof Racks for vehicles with elevated moulded (solid) roof rails
Parts for installation
4 x grey coloured
grips suitable for
elevated moulded
(solid) roof rails
Roof racks for vehicles with elevated open roof rails.
4 x black coloured
grips suitable for
elevated open
roof rails
ROOF
RAIL
1. Remove all contents from the box and ensure you have all the listed parts.
2. Slide the mounting brackets off the aluminium racks (4 in total).
3. Select the correct grips for your vehicles roof rails.
4. Position the mounting bracket as shown below; to enable clear visibility for aligning
the adjustment screw with the thread in the gripper pivot. (Refer 6A picture)
7. Cut the rubber strip for insert in the underside of the
roof rack rail, 250mm shorter than the distance between
the roof rails.
Gripper pivot
Pic. 6A
Screw Pin
Grip
Adjustment Screw
6. Rotate the gripper pivot with your finger to ensure it
is in alignment, allowing the adjustment screw be fed
through. Tighten loosely at this stage.
5. Insert the adjustment screw through the screw
pin and grip on each of the mounting brackets.
4 x Lockable covers
4 x mounting brackets
Allen key
4 x Adjustment screws
4 x Screw pins
4 x End Caps
