INTRODUCTION
This Jump Starter does not have, nor does it require a battery. In place of a battery this
Jump Starter is equipped with capacitors temporarily able to store sufficient electrical
charge to allow a vehicle to be started.
The charge input for the capacitors may be from a vehicle lacking sufficient battery
charge to start the vehicle, a healthy battery in a normally functioning vehicle, a 12V DC
outlet or a USB outlet.
Typically a normally functioning vehicle battery carries a charge of 12.2 volts. Should the
voltage of the battery fall below 10.6 volts, it is unlikely the battery will have sufficient
charge to start a vehicle.
In most cases the capacitor Jump Starter can be charged from a depleted battery. It may
also be charged from an independent power source. The Jump Starter does not have to
be pre-charged; it is charged “there and then” as the situation arises.
This product is intended for private vehicle use only, and is not intended for commercial,
trade or industrial use.
CONTENTS
1 x Jump Starter
1 x DC cable
1 x USB cable
1 x Instruction manual
1 x Warranty card
SPECIFICATIONS
Cranking Current:
Capacitors:
Working Temperature:
Approx. recharge time from a healthy battery:
Approx. recharge time from 12V socket:
Approx. recharge time from USB:
Weight:
Maximum Successive Start Attempts in a Session
Minimum Rest Period between Sessions
Up to 450A DC 12V
2.7V 500F x 5 Pieces
-20 to 60 degree C
60 seconds
3-4 minutes
30-40 minutes
1.30kg
5 times
5 minutes
5
