manualshive.com logo in svg

4tek ECO Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 34 / 39

Поделиться
Скачать
4tek ECO Series Скачать руководство пользователя страница 34

This manual is the property of 

 . No part of it may be reproduced in any form.

ECO Line Compressors Instruction Manual

8 - 01

Warranty

If installed properly and correctly sized in accordance with the dental surgery, 

4TEK S.r.l.

 

compressors are guaranteed for 24 months from the date of shipment and anyway for no more 
than 

36

 months from the date of issue of the 

4TEK

 invoice.

To validate the warranty, the Customer must (within 

30

 days from the date on which the defect 

is noted) inform 

4TEK S.r.l. 

in writing by sending an email to one of the following addresses: 

 

[email protected]

 

[email protected]

 

[email protected]

or the 

Area Representative

. 

In any case, note that the cost of transporting the compressor to be repaired will be borne by 

the customer and is not included in the cost of repair.

The warranty does not cover defects caused by incorrect maintenance, negligence, and/or 

accidental transport damage.

4TEK S.r.l.

 cannot be held liable for problems associated with compressor downtimes, 

interruption of treatments, loss of income, or any damage to property and/or injury to persons. 
This warranty can be modified only by 

4TEK S.r.l.

Содержание ECO Series








































Отзывы:

Нет отзывов