WARNING: Please read carrefully and fully understand the instructions in
this manual before operating the pneumatic power tool to ensure efficient
and safe operation. Keep this manual available for future reference. It is
the employer’s responsibility to assure this manual is read and understood
by all personnel assigned to use the tool.
WARNING: The warnings, cautions and instructions discussed in this instruction manual can not
cover all possible conditions and situations that may occur. It must be understood by the opera
-
tor that common sense and caution are factors which can no be built into this product, but must
be supplied by the operator.
When using the tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read and understand tool labels and operting instructions, safety precautions and warnings in
this manual before operating or maintaining this nailer.
Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Most accidents that result from the operation and maintenance of nailers are caused by the
failure to observe basic safety rules or precautions. An accident can often be avoided by recog
-
nizing a potentially hazardous situation before it occurs and by observing appropriate safety
procedures.
Basic sasfety precautions are outlined in the "SAFETY" secton of t his manual and in the sections
which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or tool damage are
identified as DANGERS or WARNINGS on the nailer and in this manual.
Never allow the nailer to be operated by children or individuals who have not reviewed this
manual.
OPERATE THE NAILER ACCORDING TO THIS MANUAL.
.
en
IMPORTANT INFORMATION
Always follow the tool manufacturer's safety and
maintenance instructions.
Always wear safety glasses with side shields when
orperating or servicing tools.
Always disconnect the air supply from the tool and empty
the magazine when servicing tools.
WARNING!
SAVE THIS MANUAL
FOR FUTURE REFERENCE!
18
Содержание 4PROCN80
Страница 16: ...15 SCHEMAT CZ CI 4PROCN80...
Страница 31: ...PARTS LIST AND DRAWING 30...
Страница 33: ......
Страница 34: ......