4PRO 4PRO0625, Оригинальное руководство пользователя

Страница: 2 / 19

WARNING
Upon receipt of the product, read
and follow all safety rules, operating
instructions before first use it. And
retain this manual for future reference.
Technical Data
Capacity …………… ………………………………..…….…..140pcs
Staple length…………………………………………….………12-25mm(1/2”-1”)
Pin size……………………………..……………………...Ga23 dia 0.63
Operation pressure………………………………………………60-100PSI (4-7bar)
Max. allowable pressure...........................................................8,3bar
Air consumption.................................................................... 0,26l/nail
Air inlet…………………………………………………..………1/4”N.P.T.
Dimension……………………………………………..…………45×147×215mm
Weight………………………………………………..……..……1.0kgs
Information on noise:
A-Weighted emission sound pressure level LpA:76.6dB;
A-Weighted sound power level LwA :89.6B;
Values measured according to EN 12459:1999
Information on vibration:
Vibration: 1.87m/s2
Uncertainty: U=0.258m/s2
Values measured according to ISO 8662-11:1999
1.KEEP CHILDREN AWAY. All children should be kept away from the work
area. Don’t let them handle the tool.
2.USE SAFETY GLASSES AND EAR PROTECTION: Air tool operators and
others in work area should always wear safety glasses with side shields to
prevent the injury from fasteners and flying debris when loading and
unloading this tool. Maybe the noise would harm your hearing, wear the ear
protection to safeguard.
(See fig 1.)
3.NEVER USE OXYGEN, COMBUSTIBLE OR ANY OTHER BOTTLE GAS
as a power source or would cause explosion and serious personal injury.
(See fig 2.)
4.DO NOT CONNECT TOOL TO COMPRESSED AIR which pressure
exceeds 120psi.
5.DO NOT PLACE OVER-LONG AIR HOSE in working area in case of the
operator’s unexpected tripping .Make sure all connections are tight
6.CARRING TOOL ONLY BY THE HANDLE do not keep the trigger pull on
safety yoke mechanism to avoid unintentional firing of fastener.
7.KEEP THE TOOL POINTED AWAY FROM YOURSELF and others at all
time and keep hands, any body parts away rear area to Safety guard
against possible injury.
8.DISCONNECT TOOL FROM AIR SUPPLY BEFORE LOADING fasteners
to prevent a fastener from being fired during connection. (See fig3.)
9.DO NOT KEEP THE TIRGGER OR SAFETY DEPRESSED during loading
fasteners or the unintentional firing of a fastener would cause personal
injury.
10.DISCONNECT TOOL FROM AIR SUPPLY HOSE and close the
compressor before performing maintenance, alter the accessories or during
non-operation.
11. ONLY USE PARTS AND ACCESSORIES recommend by manufacturer.
fig 1
fig 2
fig 3
Important Safety Rules
Contain:
Technical Data
Important Safety Rules
Operating Instruction
Maintenance
EN
- 2 -