4IPNET HSG260, Руководство пользователя

Страница: 140 / 194

User’s Manual
HSG Wireless Hotspot Gateway ENGLISH
135
If the amount of traffic is larger than 4
GB, the attributes of “XXXX-4GB” will be used. For example, if the
amount is 5 GB, the following settings should be set: “HSG-Byte-Amount = 1048576” and
“HSG-Byte-Amount-4GB = 1”.
On the other hand, when the administrator fills in all attributes, the user will be kicked out from the system if
any condition is reached. For example, if the administrator sets “HSG-Byte-Amount = 1048576”; “HSG -
MaxByteIn = 1048576” and “HSG- MaxByteOut = 1048576”, the user will be kicked out of the system when
the downlink, uplink, or total traffic exceeds the limit.
2. VSA configuration in RADIUS server (IAS Server)
This section will guide you through a VSA configuration in your external RADIUS server. Before getting
started, please directly or remotely access
your external RADIUS server’s desktop from other PC.
Step 1
Confirm the following key elements in the RADIUS server: users, groups, and policies.

Verify whether there are already users in the RADIUS Server.

Verify whether there are already Groups and assigned users belonging to these Groups in the
RADIUS Server.

Verify whether there are already Policies and assigned Groups belonging to these Policies in the
RADIUS Server.
Step 2
Run “Internet Authentication Server” and open “Remote Access Policies”
Right-click Policy and scroll down to the Properties page