4IPNET EAP260, Быстрое руководство по установке

Страница: 15 / 15

Quick Installation Guide
Quick Installation Guide Quick Installation Guide
Quick Installation Guide
EAP260 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved. 11
(a) Enable WDS.
(b) Enter the MAC Address (peer AP) and then Click SAVE.
If you are using another EAP260 as the peer AP, simply repeat the above-mentioned steps to configure
another peer AP(s).
Note:
On each and every configuration page, you may click SAVE to save the changes of your configured
settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the
following message will appear: “Some modifications have been saved and will take effect after
Reboot.”
Congratulations!
Now, 4ipnet EAP260 is installed and configured successfully.
After EAP260's network configuration is completed, please remember to change the IP Address of
your PC Connection Properties back to its original settings in order to ensure that your PC functions
properly in its real network environments.
It is strongly recommended to make a backup copy of your configuration settings.
For further configuration and backup information, please refer to the User’s Manual.
P/N: 10020120410