4IPNET EAP210, Быстрое руководство по установке

Страница: 14 / 22

Quick Installation Guide
EAP210 or OWL530 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
- 9 -
Basic setting of EAP210 or OWL530
4ipnet EAP210 or OWL530 supports web-based configuration. It is required to follow the respective installation
procedures provided to properly set up the desired mode for this system.

Default IP Address of Web Management Interface:
The default IP address and Subnet Mask for the AP is as follows:
Mode AP Mode
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Step 1: IP Segment Setup for Administrator PC
Set a static IP address on the same subnet mask as the AP in TCP/IP of the administrator PC, such as the
following example. Do not duplicate the IP address used here with the IP address of the APor any other
devices within the same network.
>> Example of IP Segment:
The valid range of IP address is 1 ~ 254. However, 1 must be avoided as it is already used by the AP. Below
depicts an example of using 100 (the underlined value can be changed as desired).
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Step 2: Launch Web Browser
Launch a web browser to access the web management interface of AP mode by entering the default IP
address, http://192.168.1.1/ , in the URL field, and then press Enter .