4iiii Podiiiium, Руководство пользователя

Страница: 17 / 35

4
PERFORMING A ZERO OFFSET
Single-sided mode:
A two digit response
will appear on your
display unit. Refer to
Zero Offset Table on
Page 15
Dual-sided mode:
A four digit number
will appear on
your display unit.
The first two digits
refer to the zero
offset response of
the non-drive side
of Podiiiium and
the last two digits
refer the zero offset
response of the
drive side. Refer to
Zero Offset Table on
Page 15
4.1 Performing a zero offset via ANT+
For best performance, you should allow the powermeter
to adjust to the ambient riding temperature before
performing a zero offset and starting your ride. Allowing
your powermeter to reach ambient temperatures normally
takes a few minutes.
To perform a zero offset on your powermeter using your
ANT+ display unit, follow these steps:
1. Unclip and dismount from your bike
2. Spin the crank arms four times to wake your
powermeter
3. Place your crank arms in the 12 and 6 o’clock positions
4. Use your display unit to calibrate your powermeter
i. Go to the Sensors menu
ii. Select the ANT+ ID of your powermeter
from the list of available sensors
iii. Choose
Calibrate
Quick Tip: Some display units use the term “calibration”
rather than “zero offset”.
14
Table of Contents