P/N. 4602.
000030.
03
©
4G Systems GmbH & Co. KG
|
Barmbeker Straße 2
|
22303 Hamburg, Germany
|
www.4g-systems.com
Don’t hesitate to contact us if you have any questions:
[email protected] or Tel.: +49 (0)9005 2222 13*
* 0,49 Euro per minute from German landlines
14
13
12
11
10
9
8
7
6
5
4
3
2
1
XS
Box
®
MOVE
Quick Start Guide
Completion
For finishing the wizard, press “Next” again. You will
then be shown a summary of your settings. Check
the checkbox for accepting the new function of the
Ethernet port and click on "Apply Settings" to store
the new configuration. The
XS
Box
®
MOVE
restarts
and it takes some seconds to be able to reconnect
to the device.
The basic configuration has now been completed
and your
XS
Box
®
MOVE
is ready for normal
usage, assumed that your settings are correct.
Try to access any website like
www.4g-systems.com.
Wi-Fi encryption
Never operate Wi-Fi without having enabled
encryption!
The setting “Authentication” lets you choose an
encryption method. WPA2PSK is the most advan-
ced algorithm. Avoid using WEP because its safe-
ness is known to be insufficient.
Enter you secret key into the field “Preshare key”.
Configuring Wi-Fi
If you like to use the Wi-Fi functionality of the
XS
Box
®
MOVE
, activate the wireless network
access point by selecting “Enable”.
In the field “Network ID” you may give your
network a unique name. “Channel” lets you select
the Wi-Fi-Channel to be used. It is suggested to
choose “Auto” for the automatic selection of the
best channel.
Configuring WAN
The configuration is explained using the example of
a 3G USB modem.
1. LAN IP Address: In this field you can set the IP
address of the
XS
Box
®
MOVE
. In general, this
setting must not be changed.
2. APN*: This is the URL of the access point of your
internet provider. It is only necessary to enter this
value if the APN is not already set in your 3G
modem.
3. PIN Code*: If your SIM card is PIN secured, you
must enter it here.
4. Dialed Number*: Number to dial by the modem
to establish a connection. In general not necessa-
ry, otherwise often *99# or *99***1#.
5.
Account*: Username for registration to your
internet account.
6.
Password*: Password for registration to your
internet account.
* This information can normally be found in the
documents coming from your internet provider.
Selecting WAN type
Now you must select the appropriate method to
connect to the internet. In this example, we will
connect using a 3G USB modem and therefore will
select “3G USB Modem”. Click “Next”.
Selecting the local timezone
Try to automatically detect your timezone using the
button or select one from the dropdown list manually.
Click on “Next”.
Choosing a new password
First thing suggested to be done is to change the default
password “admin” to a more complex and secret one.
Type in the current password “admin” and choose a new one
which must be entered twice. Afterwards click on “Next”.
Running the wizard
The easiest way to configure the
XS
Box
®
MOVE
is
using the wizard. Select the wizard checkbox and click
on enter.
On the next screen you will be shown an overview of
the following configuration steps.
Logging in
After being connected to the
XS
Box
®
MOVE
, the
first screen you will see is the status page where you
can log into the configuration interface.
Enter the default password
“admin”
to the field
“System Password” and click the “Login” button.
Establish a connection
The default Wi-Fi settings are: SSID “default”, chan-
nel 11, no encryption.
Open a web browser (e.g. Internet Explorer, Firefox,
Safari etc.) and type in the default IP address
http://192.168.123.254
of the
XS
Box
®
MOVE
.
Note:
The network adapter of your computer must
be configured to retrieve its IP address via DHCP or
have an IP address within the same subnet as the
XS
Box
®
MOVE
.
Connect power supply
When using the battery, it should be fully charged
once for at least 3-4 hours before using the device
for the first time. This ensures maximum lifetime of
the Li-Ion battery cells.
Afterwards power up the
XS
Box
®
MOVE
by setting the
power switch to the ON position.
It takes some seconds before the device is ready and
you may continue configuration.
Connect the RJ-45 cable to the “Ethernet” jack of the
XS
Box
®
MOVE
and the other end to a free port of
your network switch or directly to
your computer.
Setup a LAN link
Skip this step to use the device with Wi-Fi only.
Connect 3G USB-Modem
Set the power switch to OFF
and insert the battery as
shown.
Insert the Battery
Skip this step if you are planning a stationary use of
the device without battery.
